Group I base oils are classified as less than 90 percent saturates, greater than 0.03 percent sulfur and with a viscosity-index range of 80 to 120. The temperature range for these oils is from 32 to 150 degrees F. Group I base oils are solvent-refined, which is a simpler refining process. This is why they are the cheapest base oils on the market.
Group II base oils are defined as being more than 90 percent saturates, less than 0.03 percent sulfur and with a viscosity index of 80 to 120. They are often manufactured by hydrocracking, which is a more complex process than what is used for Group I base oils. Since all the hydrocarbon molecules of these oils are saturated, Group II base oils have better antioxidation properties. They also have a clearer color and cost more in comparison to Group I base oils. Currently, Group II base oils are becoming very common on the market today and are priced very close to Group I oils.
Group III base oils are greater than 90 percent saturates, less than 0.03 percent sulfur and have a viscosity index above 120. These oils are refined even more than Group II base oils and generally are severely hydrocracked (higher pressure and heat). This longer process is designed to achieve a purer base oil. Although made from crude oil, Group III base oils are sometimes described as synthesized hydrocarbons. Like Group II base oils, these oils are also becoming more prevalent.
Group IV base oils are polyalphaolefins (PAOs). These synthetic base oils are made through a process called synthesizing. They have a much broader temperature range and are great for use in extreme cold conditions and high heat applications.
Group V base oils are classified as all other base oils, including silicone, phosphate ester, polyalkylene glycol (PAG), polyester, bio lubes, etc. These base oils are at times mixed with other base stocks to enhance the oil’s properties. An example would be a PAO-based compressor oil that is mixed with a polyester. Esters are common Group V base oils used in different lubricant formulations to improve the properties of the existing base oil. Ester oils can take more abuse at higher temperatures and will provide superior detergency compared to a PAO synthetic base oil, which in turn increases the hours of use.
SN350 is a defined as a light grade base oil in the middle of the specifications of Grade I base oils. They are mainly used in lubricant and lubricant additives production. It has been solvent refined, dewaxed and hydrogen treated to take out impurities.Cutback bitumen is classified based on viscosity grade. It is divided into three categories:
SN 350 serves as a base stock for several industrial lubricants
- General purpose oils
- Mould oil
- Transmission fluids
- Gear oils
- Metal working fluids
- Hydraulic oils
- Transformer oils
SN 500 is defined as a light grade base oil at the upper end of the specifications for Grade I base oils. They are mainly used in lubricant production. It is a Group I base oil which has undergone solvent refining and dewaxing processes. To finish the refining, it was hydrogen treated to clear out any impurities.